Nissan Pathfinder Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey all
Just swapped my 20s for some 17s on my pathfinder platinum, I had tps sensors put in that I bought after market ,the scan tool reads them no problem there but garage can't get new sensors stored to ecm.i check and found I could do it with a paper clip grounding connector BUT I can't find the connector I ripped bottom of dash off and all I have is ob2 connector and right beside it mounted to bottom panel is a wonki 6 pin connector,and over by fuse box all thays there is the breaking thing for electronic trailer break....I don't see the 1 wire connector any were .
Any ideas were it should be in a 2019 pathfinder platinum
Thanks,
 

·
Registered
2019 Nissan Pathfinder SV 4x4
Joined
·
955 Posts
No such connector on a 2013+ pathfinder. It's all got to be done with the appropriate scan tools.
 

·
Super Moderator
2013 Pathfinder SL, Connecticut, USA
Joined
·
4,661 Posts
1 - 3 of 3 Posts
Top