Has anyone tried replacing the front and rear turn signal bulbs with LED? I believe this is the last part to fully have all LED lights in my 2022 PF SL. I found an option for the rear but not for the front.
LED Turn Signal bulbs
1 - 20 of 25 Posts
Joined
·
3 Posts
I purchased front and rear from Lasfit.com; Front 3157; Rear 7440. Standard Bulbs I was told. Haven't received them yet. Purchased from same Co. for the Frontier and great lights!
Mike
Joined
·
3 Posts
Let me know if have determined how to remove rear light assy to install turn signal and marker bulbs?
MIke
Joined
·
9 Posts
How do you replace the front turn signals? And what about the backup lights? And the fog lights are terrible too.
Nice! Which bulbs did you go with? Any tips on the install?
Joined
·
5 Posts
For front I used these. Just search “Alla-7443-3020-30Y-Yellow-TS”
it’s relatively easy. The bulb is isolated on a wire on each side. Just turn counterclockwise and it comes right out. Pull out stock bulb and insert new and place back in a lot and turn clockwise. They look great.
For the rear I used “Alla-5730-7443-33Y-Yellow-LED” and used that YouTube on this thread to remove tail light.
Both bulbs work great and are all that was missing from the outside light assembly to complete the beautifully redesigned PF
Great, thanks!!! Any before/after pics?
I know it’s an old thread, but I managed to used all lasfit led bulbs, the front ones were super easy, just look for the light grey knob and twist them out counterclockwise, the video above was incredibly helpful on the rear but the reverse lights took a little work but otherwise easy, I’m just waiting for my side marker LED’s to arrive and it should be complete(T10’s in red). The manual mentions the turn signals as part of DIY work but if anyone’s wondering, T15’s for reverse, 7440’s for rears, 7443’s for the front. If they don’t work just take them out and flip them.
It was between these or the Alla’s above:
![Font Material property Parallel Paper Paper product]()
![Drink Font Alcoholic beverage Glass bottle Distilled beverage]()
![Material property Font Liquid Magenta Fluid]()
Before:
![Vehicle Automotive side marker light Wheel Vehicle registration plate Car]()
![Tire Wheel Car Automotive tail & brake light Vehicle]()
![Car Tire Wheel Vehicle Automotive tail & brake light]()
during, the right one is the stock one, the left one is the Lasfit
![Automotive parking light Car Vehicle Automotive lighting Hood]()
After:
![Wheel Tire Car Automotive tail & brake light Vehicle]()
![Tire Wheel Car Land vehicle Automotive parking light]()
![Automotive parking light Automotive side marker light Automotive tail & brake light Vehicle Automotive lighting]()
It was between these or the Alla’s above:
Before:
during, the right one is the stock one, the left one is the Lasfit
After:
Very nice, thanks for sharing! 
Nicely done, @DyingStar - the pictures show this off quite well.
Thanks for posting!!
Thanks for posting!!
Thank you!, hope it helps everyone who wants to upgrade them, this is a canvas, last night I finally got my side marker LED’s that low key make a difference but are the final halogens in the rear light housings!
T10’s were perfect, i got them in Red but since plastic is red, white would work, considering it’s the color of the bulb that come with anyways lol
No problems so far, no resistors used, I got the error free canbus that do not require resistors, even the Alla lighting mentioned earlier.
Just be mindful The female input connectors on the housing do require the LED’s to be inserted in a certain way, If they don’t work the first time just reseat them or flip the led around until they do, changing the front ones and reverse lights are 10/10 of easy, the rear ones just require some manual work but still 9/10 easy!
The interior halogens are easier If you want to try as well!!
Amazing thank you!! I’m ordering today lol
Ya the interiors were done the second week having the car. After getting used to led interior lights I don’t think I can ever go back to halogen 😂. Also did the reverse lights in led, it was hard working in such a tight space
Ya the interiors were done the second week having the car. After getting used to led interior lights I don’t think I can ever go back to halogen 😂. Also did the reverse lights in led, it was hard working in such a tight space
Thanks again @DyingStar ! My front turn signal LEDs arrived today and agree what a difference they make. TIP - each headlight has 2-3 bulb cable holders that you can gently slide out the cable from to give yourself more room to maneuver the LED into the housing. Once done, just slide the bulb cable back into the holders and you're good to GO!
Thanks for sharing, it helped me to update to Lasfit bulbs as well and it looks much better.
Does anyone has the hyperflash when leave the hazard lights for about 30sec to 1min?
It also happened when keep turn signal for the same time.
Not sure if I got defective bulbs.
Does anyone has the hyperflash when leave the hazard lights for about 30sec to 1min?
It also happened when keep turn signal for the same time.
Not sure if I got defective bulbs.
I briefly saw this on One of my rear bulbs, i turned the blinkers off and they acted normal, the built in resistors help with this, the manufacturer mentioned it’s normal and that after a minute or less they are back to normal.
“Each bulb has a built-in Intelligent Temperature Control System (ITCS). If the bulb is left turned-on for an extended period of time, roughly over 5 minutes depending on the working environment temperature, then it will begin to hyper flash. This is the built-in Intelligent Temperature Control System warning you the LED bulb is getting too hot.
All you have to do is turn off it for a few minutes, in order for it to cool down, and it will go back to functioning properly. This is very common, so don't get worried or concerned if it happens to you. “
From their website
1 - 20 of 25 Posts
