[sparky2708]

Not hard at all. Total time to complete the swap was 5 min (for both bulbs). You don't have to remove anything to get to the low beam bulbs, which is a welcome change. Unplug the factory bulbs, rotate to release them, put in the new bulbs, plugin and that's about it. if you have any questions, hit me up.

What he said... 5-10 minutes


Sent from my iPad using Tapatalk

 

[cmejia]

Does anyone know what bulb is needed for the tail lights..I would like to replace all the rear Lights...break/courtesy. 2019 Nissan Pathfinder S

 

[oz212]

Does anyone know what bulb is needed for the tail lights..I would like to replace all the rear Lights...break/courtesy. 2019 Nissan Pathfinder S

Brake and turn signal lights are 7443, reverse lights are T15.

 

[cmejia]

Brake and turn signal lights are 7443, reverse lights are T15.

Thanks....what about parking lights.. I was told each tailight takes 3 bulbs

 

[oz212]

Thanks....what about parking lights.. I was told each tailight takes 3 bulbs

7443 for turn signals (or parking lights as you call them)

 

[Tricky17]

I have full Led interior and exterior. Reverse lights are my favorite. Makes your back up cam look so vivid.

 

[oz212]

I have full Led interior and exterior. Reverse lights are my favorite. Makes your back up cam look so vivid.

Definitely, at first I thought the camera on the PF was horrible until I swapped my reverse lights for LEDs and that made a huge difference.

 

[Tricky17]

Thanks....what about parking lights.. I was told each tailight takes 3 bulbs

You technically only need 2. The 3rd is so small that you won't see a difference in going led with it.

 

[Tricky17]

Subscribe to this guy's channel on youtube. He is the pathfinder LED
God. lol He will give you all the info you need.