Nissan Pathfinder Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I installed the needed 4 way flat harness and the relay harness/relays (behind the panel in the rear interior of the vehicle) needed for stop and turn signals for towing. It partially works. A circuit tester confirms that I only get signal to the right turn signal output when the right turn signal is activated AND the lights are on. Nothing else shows a signal in that configuration. The left turn signal output only has signal when the left turn signal is activated AND the brakes are pressed. These are the only ways I can get any signal on any port. Thoughts?
 
1 - 1 of 1 Posts
Top