It might say Murano, but if you look at the picture and glass it is identical to the one that's on my pathfinder. I suppose I could try pull it out to see if the part number is on the back, but knowing my luck I will probably break it in the process.
Here is another site that has it, specific to the pathfinder.
I have put together a bit of a template for those that want to do the cutout, attaching here cause i couldn't figure out how to attach a pdf in private message.
I have also taken some photos of the template, basically used 3 sheets of A4 paper the make a quick and dirty template for where the cut out position is to go. Saved these to PDF, so if you print it out in A4, you will have same size and be able to match the door and wheel arch markings, as per my photos.
There is a more detailed view of the cut out template in the PDF
Obviously practise on something first, maybe a hard plastic sheet or something.
I have also attached a bunch of pics for those interested to see how the template should look. This was all on the front left side. I imagine right side is in reverse, let me know if you need some pics of the right side.
Thanks for posting "mercina". Although it looks very nice having those blinkers installed, I don't know if I would be able to cut the metal myself.
Does anyone in this forum knows if the US-built Pathfinders come pre-wired.